| Version 2025 |
12/10/2023 - 15:43 |
0.0401.1a |
Pre-work qualifications |
Verify that installation area is free of:
active water leaks, fuel leaks (i.e., gas, oil, propane), and pest intrusions
energized knob and tube wiring
improperly terminated devices (ventilation fans, dryers, plumbing stacks, condensate lines, combustion appliance flues/chimneys, etc.)
unshielded high-temperature devices (non-IC rated recessed lights, chimneys, flues, vents, etc.) unless they are zero clearance devices
insulation escape openings
Verify that installation area is intact, able to support insulation weight, and air sealed
Verify existing building eaves/overhangs will adequately exceed new wall thickness to prevent moisture intrusion
Verify all installed panels are above grade as per manufacture's specification
Determine if mechanical or utility penetration needs to extended in the installation area
Verify that installation area is structurally able to support the weight of added insulation panels
, basic_html |
Ensure wall space can be safely and durably insulated
, basic_html |
|
Red Line |
| Version 2025 |
12/10/2023 - 15:43 |
0.0401.1a |
Pre-work qualifications |
Verify that installation area is free of:
active water leaks, fuel leaks (i.e., gas, oil, propane), and pest intrusions
energized knob and tube wiring
improperly terminated devices (ventilation fans, dryers, plumbing stacks, condensate lines, combustion appliance flues/chimneys, etc.)
unshielded high-temperature devices (non-IC rated recessed lights, chimneys, flues, vents, etc.) unless they are zero clearance devices
insulation escape openings
Verify that installation area is intact, able to support insulation weight, and air sealed
Verify existing building eaves/overhangs will adequately exceed new wall thickness to prevent moisture intrusion
Verify all installed panels are above grade as per manufacture's specification
Determine if mechanical or utility penetration needs to extended in the installation area
Verify that installation area is structurally able to support the weight of added insulation panels
, basic_html |
Ensure wall space can be safely and durably insulated
, basic_html |
|
Red Line |
| Version 2025 |
12/10/2023 - 15:43 |
0.0401.1a |
Pre-work qualifications |
Verify that installation area is free of:
active water leaks, fuel leaks (i.e., gas, oil, propane), and pest intrusions
energized knob and tube wiring
improperly terminated devices (ventilation fans, dryers, plumbing stacks, condensate lines, combustion appliance flues/chimneys, etc.)
unshielded high-temperature devices (non-IC rated recessed lights, chimneys, flues, vents, etc.) unless they are zero clearance devices
insulation escape openings
Verify that installation area is intact, able to support insulation weight, and air sealed
Verify existing building eaves/overhangs will adequately exceed new wall thickness to prevent moisture intrusion
Verify all installed panels are above grade as per manufacture's specification
Determine if mechanical or utility penetration needs to extended in the installation area
Verify that installation area is structurally able to support the weight of added insulation panels
, basic_html |
Ensure wall space can be safely and durably insulated
, basic_html |
|
Red Line |
| Version 2025 |
12/10/2023 - 15:43 |
0.0401.1a |
Pre-work qualifications |
Verify that installation area is free of:
water leaks, fuel leaks, and pest intrusions
improperly-terminated devices, such as ventilation fans, dryers, combustion appliances flues or chimneys, etc.
Verify that installation area is structurally able to support the weight of added insulation panels
, basic_html |
Ensure wall space can be safely and durably insulated
, basic_html |
|
Red Line |
