Specification History

SWS Version Created Specification ID Title Specification Objective Supporting Materials Rationale Status
Version 2020 14/08/2020 - 14:23 3.0201.9d Opening preparation

Remove existing window stops, sashes, parting strips, pulleys, and weights

Insulate and seal existing window weight pockets if they will remain after new installation

Replace any damaged or rotting framing

Remove any material from the sealing area that will prevent full adhesion of the selected sealant

Remove any material from the installation area that will prevent a level and firm installation

Seal the rough opening to the wall system's air and thermal boundary with non-expanding sealants

Install flashing to direct water away from the window opening in accordance with manufacturer's instructions

Rough opening sealed, insulated, and properly prepared for installation

Black Line
Version 2020 14/08/2020 - 14:23 3.0201.9d Opening preparation

Remove existing window stops, sashes, parting strips, pulleys, and weights

Insulate and seal existing window weight pockets if they will remain after new installation

Replace any damaged or rotting framing

Remove any material from the sealing area that will prevent full adhesion of the selected sealant

Remove any material from the installation area that will prevent a level and firm installation

Seal the rough opening to the wall system's air and thermal boundary with non-expanding sealants

Install flashing to direct water away from the window opening in accordance with manufacturer's instructions

Rough opening sealed, insulated, and properly prepared for installation

Black Line