Specification History
| SWS Version | Created | Specification ID | Title | Specification | Objective | Supporting Materials | Rationale | Status |
|---|---|---|---|---|---|---|---|---|
| Version 2020 | 08/14/2020 - 14:23 | 3.0201.9d | Opening preparation | Remove existing window stops, sashes, parting strips, pulleys, and weights Insulate and seal existing window weight pockets if they will remain after new installation Replace any damaged or rotting framing Remove any material from the sealing area that will prevent full adhesion of the selected sealant Remove any material from the installation area that will prevent a level and firm installation Seal the rough opening to the wall system's air and thermal boundary with non-expanding sealants Install flashing to direct water away from the window opening in accordance with manufacturer's instructions |
Rough opening sealed, insulated, and properly prepared for installation |
Black Line | ||
| Version 2020 | 08/14/2020 - 14:23 | 3.0201.9d | Opening preparation | Remove existing window stops, sashes, parting strips, pulleys, and weights Insulate and seal existing window weight pockets if they will remain after new installation Replace any damaged or rotting framing Remove any material from the sealing area that will prevent full adhesion of the selected sealant Remove any material from the installation area that will prevent a level and firm installation Seal the rough opening to the wall system's air and thermal boundary with non-expanding sealants Install flashing to direct water away from the window opening in accordance with manufacturer's instructions |
Rough opening sealed, insulated, and properly prepared for installation |
Black Line |