Specification History
| SWS Version | Created | Specification ID | Title | Specification | Objective | Rationale | Status |
|---|---|---|---|---|---|---|---|
| Version 2020 | 08/14/2020 - 14:23 | 4.0103.7e | Fiberglass installation | Install stabilized fiberglass (i.e., wet-spray applied) when available If ceiling pitch is less than or equal to 6/12, install loose fill fiberglass insulation to prescribed R-value without gaps, voids, misalignments, or wind intrusions If ceiling pitch is greater than 6/12, loose fill fiberglass insulation may not be used (dense pack fiberglass may be used) |
Fiberglass insulation remains in place when installed on sloped surface of appropriate pitch |
Black Line | |
| Version 2020 | 08/14/2020 - 14:23 | 4.0103.7e | Fiberglass installation | Install stabilized fiberglass (i.e., wet-spray applied) when available If ceiling pitch is less than or equal to 6/12, install loose fill fiberglass insulation to prescribed R-value without gaps, voids, misalignments, or wind intrusions If ceiling pitch is greater than 6/12, loose fill fiberglass insulation may not be used (dense pack fiberglass may be used) |
Fiberglass insulation remains in place when installed on sloped surface of appropriate pitch |
Black Line | |
| Version 2020 | 08/14/2020 - 14:23 | 4.0103.7e | Fiberglass installation | Install stabilized fiberglass (i.e., wet-spray applied) when available If ceiling pitch is less than or equal to 6/12, install loose fill fiberglass insulation to prescribed R-value without gaps, voids, misalignments, or wind intrusions If ceiling pitch is greater than 6/12, loose fill fiberglass insulation may not be used (dense pack fiberglass may be used) |
Fiberglass insulation remains in place when installed on sloped surface of appropriate pitch |
Black Line |