Subtopic 7.0301 Thermal Loss Reduction

Pipe wrap insulation matching the diameter of the water pipes is installed to reduce thermal loss, prevent freezing, or reduce condensation of water distribution piping.

Pipe wrap insulation sized to match the interior diameter of the water lines was installed to reduce thermal losses.

A piece of pipe wrap insulation is cut to ensure adequate clearance between the insulation and the fuel-fired water heater vent connector.

Pipe wrap insulation sized to match the interior diameter of the water lines was installed to reduce thermal losses.

Two pieces of pipe wrap insulation were cut at a 45 degree angle to form a tight fit.

The seams and ends of the pipe wrap insulation are sealed with foil tape.

A weatherization installer uses pipe wrap insulation to insulate a water line.