Specification History
| SWS Version | Created | Specification ID | Title | Specification | Objective | Supporting Materials | Rationale | Status |
|---|---|---|---|---|---|---|---|---|
| Version 2025 | 10/12/2023 - 15:44 | 0.0401.1b | Material selection | Select panels in compliance with the AHJ, Select panel design that meets the fire-safety requirements of the AHJ Consider if challenging wall details might be resolved with the use of different retrofit panel thicknesses Determine if windows and doors should be relocated to newly created plane of retrofit wall system with built-out framing or left in place at current wall plane , basic_html |
Prevent condensation on warm side of retrofit panel , basic_html |
Red Line | ||
| Version 2025 | 10/12/2023 - 15:44 | 0.0401.1b | Material selection | Select panels in compliance with the AHJ, Select panel design that meets the fire-safety requirements of the AHJ Consider if challenging wall details might be resolved with the use of different retrofit panel thicknesses Determine if windows and doors should be relocated to newly created plane of retrofit wall system with built-out framing or left in place at current wall plane , basic_html |
Prevent condensation on warm side of retrofit panel , basic_html |
Red Line | ||
| Version 2025 | 10/12/2023 - 15:44 | 0.0401.1b | Panel storage onsite | Follow manufacturer’s recommendations, including: stack panels with sheathing side (OSB or plywood) downward stack panels off the ground on dunnage or stickers made of dimensional lumber protect panels from weather, ground moisture, and ultraviolet degradation limit height of panel stack to prevent deforming bottom panels from weight of those above , basic_html |
Ensure integrity and longevity of retrofit wall panels , basic_html |
Red Line |