Specification History
SWS Version | Created | Specification ID | Title | Specification | Objective | Supporting Materials | Rationale | Status |
---|---|---|---|---|---|---|---|---|
Version 2025 | 10/02/2023 - 17:40 | 3.0102.1c | Clearance | Maintain a minimum clearance of 3 inches between enclosure and all portions of fixture (e.g. wiring, box, and ballast) Enclosure must be at least as tall as the surrounding insulation Note: Installing an LED bulb in a non-IC rated fixture does not change the rating of the fixture or the need for an airtight enclosure. |
Prevent overheating of fixture |
The committee discussed whether they want to add a detail for installing LED retrofit kits w/airtight trim in non-IC rated can lights to accomplish the same outcome as the existing detail for sealing the can light with a box. Through committee discussion, additional clarification was added to 3.0102.1c. | Red Line | |
Version 2020 | 08/14/2020 - 14:22 | 3.0102.1c | Clearance | Maintain a minimum clearance of 3 inches between enclosure and all portions of fixture (e.g. wiring, box, and ballast) Enclosure must be at least as tall as the surrounding insulation , basic_html |
Prevent overheating of fixture , basic_html |
Black Line | ||
Version 2020 | 08/14/2020 - 14:22 | 3.0102.1c | Clearance | Maintain a minimum clearance of 3" between enclosure and all portions of fixture (e.g. wiring, box, and ballast) Enclosure must be at least as tall as the surrounding insulation |
Prevent overheating of fixture |
Black Line | ||
Version 2020 | 08/14/2020 - 14:22 | 3.0102.1c | Clearance | Maintain a minimum clearance of 3" between enclosure and all portions of fixture (e.g. wiring, box, and ballast) Enclosure must be at least as tall as the surrounding insulation |
Prevent overheating of fixture |
Black Line |