Loose Fill to Capacity

Verify that installation area is free of:

active water leaks, fuel leaks (i.e., gas, oil, propane), and pest intrusions

energized or undammed knob and tube wiring

uncovered electrical junctions

improperly terminated devices (ventilation fans, dryers, plumbing stacks, condensate lines, combustion appliance flues/chimneys, etc.)

unshielded high-temperature devices (non-IC rated recessed lights, chimneys, flues, vents, etc.) unless they are zero clearance devices

insulation escape openings

Verify that installation area:

is intact, able to support insulation weight, and air sealed

Setup a dust control enclosure for all interior access locations that limits insulation and construction dust exposure to the occupant and occupant belongings

Select insulation materials that have a flame spread and smoke development index of 25/450 or less when tested in accordance with ASTM E84 or UL 723

Install blown insulation to maximum R-value from attic floor to ceiling to full capacity without dense packing, but without voids

Install closure system over all access holes that is airtight, durable, and aesthetically pleasing

Post a dated receipt signed by the installer that minimally includes: Installed insulation type, coverage area, installed thickness, minimum settled thickness, installed R-value, and number of bags installed